Open triangular sleeve + sliding inner boxCustom sizeSVG · PDF · DXF · AIkerf compensated
drag to rotate · scroll to zoom · shift-drag to pan
About the Christmas Tree Sleeve Box generator
The Christmas tree sleeve box is two pieces: an open triangular sleeve and a sliding inner box with a decorated lid. The lid pattern does the decorating, so the sleeve itself stays plain and elegant.
What you can adjust
Outside or inside measurements, so the box fits the space — or the contents.
Material thickness from presets or a custom value, plus your machine's kerf.
Finger joints or flat, glued edges, with a target tooth width you can change.
A 3D preview you can spin, and a flat cutting plan with every panel named.
How it goes together
The sleeve is three panels joined at the corners. The inner box is the same triangle, one material thickness smaller, with a base plate — it slides in from the top and the lid closes over it.
Tips for a clean cut
Cut the inner box first and test the fit in the sleeve: it should slide without wobbling. A quarter of a millimetre of clearance on each side is normally enough.
Frequently asked questions
Can I work in inches or centimeters?
Yes. Switch between mm, cm and inches at the top of the panel. Material thickness and kerf are always entered in millimeters.
Which file formats can I download?
SVG, PDF and DXF — all at 1:1 scale, in millimeters. AI files read the SVG or DXF straight into Illustrator.
What does the “Try other dimensions” button do?
It fills in a different set of measurements so you can see how the design changes before you enter your own.